Marble is used indoors and outdoors. However, marble polishing is a prelude to stone crystal surface treatment or a necessary process in stone processing. Then, how to deal with marble polishing? Next, let’s talk to FABULOUS Group. Get up and take a look.
1. Before performing marble polishing, first check the shape of the marble used to see if the marble material to be decorated conforms to the shape of the process sheet, and then the marble polishing process, first of all, the marble Remedial rubber treatment in the relevant area, you must wait until the rubber replenishment treatment is completed before grinding and polishing.
2. The first is to make a single piece of line drawing and rough grinding, usually leaving it in 0.5mm fine grinding, and the same is true for water grinding; after completion, it is spliced, mainly to connect the polished and polished lines, and then follow The color of the surface of the line is adjusted accordingly to ensure the color of the marble surface and a good pattern effect. After the line water mill 500#, the number is unified according to the requirements of the installation drawing, and then it is disassembled and polished. This will not cause the polished line to be concave and convex at the interface.
3. When the interface is misaligned, the transition section should be polished to extend the distance, the longer the better, and use a ruler to check the straightness when polishing; the polished line can be shipped only after passing the quality inspection.
4. After the polishing is completed, use a water suction machine to treat the moisture on the ground, and at the same time use a blow dryer to dry the whole stone floor. If time permits, you can also use natural air drying to keep the stone surface dry.
5. Spray the potion evenly on the ground while grinding with a marble polishing machine. Use a washing machine and a scouring pad to spray the potion and the same amount of water on the ground, start grinding, and make the crystal face material on the surface of the stone under the action of heat. The surface effect formed after crystallization.
6. Overall ground maintenance treatment: If it is a stone with large voids, it needs to be painted with marble protective agent and polished again to increase the crystal surface hardness of the entire ground.